Replace that old canister filter with a modern Spin-on type.

Fifteen custom designs ensure a perfect fit on your ALFA.

Why change? Cartridge-type oil filters are becoming hard to find. "O" rings are not always available in the correct size. Filters do not always seal because of missing pieces and wrong filter length --- possibly resulting in serious bearing damage. ---- Cure all this with a HURLOCK ENGINEERING spin-on filter adapter, which accepts readily available spin-on filters from your local parts store.

Spin-on oil filter adapter kits are available for all 105 Series Alfas.--- Install yourself in a few minutes.
750-101 Series housings need some machining by HURLOCK ENGINEERING
These are returned ready to bolt back on.

ORDERING INFORMATION.

There are about eight different housing types used on 750-101 & 105 Series Alfas, so there is no such thing as "one size fits all". Each adapter is designed to fit only your specific housing type.

Materials and construction: High quality Alum. bar stock. Free-machining steel (leadloy).
Tin-zinc plated bolts for corrosion protection, and nitrile "O" rings.
 

750-101 series:

Send your housing, minus the canister, to the address shown below. It will be returned ready to bolt back on.
You supply the filter of your choice from your local supplier.
 

105 series:

Indicate the name of the housing manufacturer shown on the top or side of the casting.
It will be one of the following:
COMIT:
FALCOS:
FISPA: This information will ensure that you receive a perfectly fitting part.
FIAAM:
FRAM:

ALL SPIN-ON ADAPTER KITS ARE SUPPLIED THE NECESSARY "O" RINGS.
FULL INSTALLATION INSTRUCTIONS, AND A COMPLETE LISTING OF RECOMMENDED SPIN-ON FILTERS.